Fasteners
A fastener is a hardware device that mechanically joins or affixes two or more objects together.
Crosby® 1046038 M-279 Full Threaded Machinery Eye Bolt, M27x3, 69.8 mm L Shank, Forged Steel
Crosby® Eye Bolt, Full Threaded Machinery, Series: M-279, Measurement System: Metric, M27x3 Thread, 69.8 mm Shank Length, Forged Steel, 57.1 mm ID Eye, 107 mm OD Eye, 183 mm Overall Length, 5000 lb Working Load
$166.19/Each
Total Stock Available : 0 |
Crosby® 1075213 HG-4060 Lock Nut, 5/8 in, Steel, Galvanized, Right Thread
Crosby® Lock Nut, Series: HG-4060, Measurement System: Imperial, 5/8 in Thread, Steel, Galvanized, Right Thread, 0.38 in Height, 0.94 in Width Across Flats
$2.97/Each
Total Stock Available : 0 |
Crosby® 1075231 HG-4060 Lock Nut, 3/4 in, Steel, Galvanized, Right Thread
Crosby® Lock Nut, Series: HG-4060, Measurement System: Imperial, 3/4 in Thread, Steel, Galvanized, Right Thread, 0.42 in Height, 1.13 in Width Across Flats
$5.33/Each
Total Stock Available : 0 |
Crosby® 1075598 HG-4061 Lock Nut, 5/8 in, Steel, Galvanized, Left Thread
Crosby® Lock Nut, Series: HG-4061, Measurement System: Imperial, 5/8 in Thread, Steel, Galvanized, Left Thread, 0.38 in Height, 0.94 in Width Across Flats
$6.74/Each
Total Stock Available : 0 |
Crosby® 1075614 HG-4061 Lock Nut, 3/4 in, Steel, Galvanized, Left Thread
Crosby® Lock Nut, Series: HG-4061, Measurement System: Imperial, 3/4 in Thread, Steel, Galvanized, Left Thread, 0.42 in Height, 1.12 in Width Across Flats
$8.23/Each
Total Stock Available : 0 |
Crosby® 1090438 G-400 Eye Nut, 1/4 in, Forged Steel, Hot Dipped Galvanized, 520 lb Working
Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 1/4 in Thread, Forged Steel, Hot Dipped Galvanized, 520 lb Working Load, 3/4 in Eye ID, 1-1/4 in OD Eye, 0.38 in Thread Length, 1.72 in Overall Height, Material Grade: ASME B30.26, UNC Thread
$15.26/Each
Total Stock Available : 0 |
Crosby® 1090697 G-400 Eye Nut, 2 in, Forged Steel, Hot Dipped Galvanized, 40000 lb Working
Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 2 in Thread, Forged Steel, Hot Dipped Galvanized, 40000 lb Working Load, 4.1 in Eye ID, 7.12 in OD Eye, 2.06 in Thread Length, 9.91 in Overall Height, Material Grade: ASME B30.26, UNC Thread
$350.33/Each
Total Stock Available : 0 |
DeWALT® Anchors & Fasteners™ 08289-PWR Single Spiral Wire Brush, Stainless Steel, 11 in L, 1.20 inch Brush Diameter, Helical Brush Type, 0.22 inch Shank Diameter, For Use With 1-1/8 in ANSI Hole
08289-PWR Single Spiral Wire Brush, Stainless Steel, 11 in L, 1.20 inch Brush Diameter, Helical Brush Type, 0.22 inch Shank Diameter, For Use With 1-1/8 in ANSI Hole ; DeWALT Anchors & Fasteners ; 08289-PWR ; 224906817 ; 075352082899 ; Adhesive Anchor Accessories
$23.47/Each
Total Stock Available : 0 |
DeWALT®️ Anchors & Fasteners™ PFC1640600 Heavy Duty Extension Hose, 25 ft Extension Hose
DeWALT®️ Anchors & Fasteners™, PFC1640600, Extension Hose, Heavy Duty, Specifications: 25 ft Extension Hose
$79.93/Each
Total Stock Available : 0 |
DeWALT® 8409 Manual Injection Tool, Standard All Metal, For Use With 21.5 oz Cartridges
DeWALT® Injection Tool, Manual, Standard All Metal, For Use With: 21.5 oz Cartridges
$88.38/Each
Total Stock Available : 0 |
DeWALT® The AC100+ Gold® 8478SD-PWR Quik-Shot Adhesive Anchoring System, 9.5 fl-oz Cartridge
DeWALT® The AC100+ Gold® Adhesive Anchoring System, Quik-Shot, Cartridge Container, 9.5 fl-oz Container, Composition: Vinylester, 14 to 104 deg F, Applicable Materials: Normal Weight Concrete, Lightweight Concrete, Grouted Concrete Masonry, Hollow Concrete Masonry, Hollow Core Concrete, Brick Masonry and Unreinforced Masonry
Call for pricing
Total Stock Available : 0 |
Flange Wizard® 42050-TL 2-Hole Long Threaded Flange Alignment Pin, 1/2 to 1-15/16 in Dia Hole
Flange Wizard® Flange Alignment Pin, 2-Hole Long Threaded, Specifications: 1/2 to 1-15/16 in Dia Hole
$147.20/PAIR
Total Stock Available : 0 |
HILTI 2334276 Adhesive, 12 oz Foil
HILTI, 2334276, Adhesive, Foil Container, 12 oz Container
$106.78/Each
Total Stock Available : 0 |
HILTI 273211 HIT-RB Round Brush, Steel, 7/8 in
HILTI Brush, Round, Series: HIT-RB, Steel, Specifications: 7/8 in
$37.76/Each
Total Stock Available : 0 |
HILTI 360485 HIT-SC Composite Modular Mesh Sleeve, 13/16 in OD, For Use With HIT-HY 70, HIT-HY 170, HIT-HY 270 and HIT-MM PLUS Injectable Adhesive Anchors, Plastic
HILTI Mesh Sleeve, Composite Modular, Series: HIT-SC, Plastic, 13/16 in OD, For Use With: HIT-HY 70, HIT-HY 170, HIT-HY 270 and HIT-MM PLUS Injectable Adhesive Anchors
$64.40/PACKAGE OF 20
Total Stock Available : 0 |
HILTI 60579 Blow Out Pump, For Use With Mortar or Anchors
HILTI Blow Out Pump, For Use With: Mortar or Anchors
$104.71/Each
Total Stock Available : 0 |
Crosby® 1045256 G-277 Eye Bolt With Shoulder Nut, 7/8 in, 5 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 7/8 in Thread, 5 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1-3/4 in ID Eye, 3-1/4 in OD Eye, UNC Thread, 8.46 in Overall Length, 10600 lb Working Load, 2-1/2 in Thread Length
Call for pricing
Total Stock Available : 0 |
HILTI 3537460 HIT-RE 500 V3 Epoxy Mortar, 11.2 fl-oz Can, Mixture Form, Part A: Light Gray/Part B: Red
HILTI Epoxy Mortar, Series: HIT-RE 500 V3, Can Container, 11.2 fl-oz Container, Composition: Part A: Bisphenol-A-Epichlorhydrin Epoxy resin, Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol, butanedioldiglycidyl ether, 1,3 Propanediol, 2 ethyl-2-(hydroxymethyl)-, polymer with 2-(chloromethyl)oxirane, [3-(2,3-epoxypropoxy)propyl]trimethoxysilane/Part B: 2-methyl-1,5-pentanediamine, Quartz, Phenol, styrenated, m-Xylylenediamine, 2,4,6-tris(dimethylaminomethyl)phenol, 3-Aminopropyltriethoxysilan, Mixture Form, Part A: Light Gray/Part B: Red, Part A: Characteristic/Part B: Amine Odor/Scent, -40 to 158 deg F, Part A: >200 deg F, Part B: >200 deg F Flash Point, Part B: 11.5 pH, Part A: 45 to 59 Pa s/Part B: 50 to 70 Pa s Viscosity, Flammability: 1, Applicable Materials: Concrete
Call for pricing
Total Stock Available : 0 |
KEN FORGING K2023 Fully Threaded Shoulder Pattern Eye Bolt, 3/8-16, 1-1/4 in L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 3/8-16 Thread, 1-1/4 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1 in ID Eye, 1-21/32 in OD Eye, UNC-2A Thread, 3.09 to 3.47 in Overall Length, 1300 lb Working Load, 1-1/4 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489
$4.28/Each
Total Stock Available : 0 |
KEN FORGING K2025 Fully Threaded Shoulder Pattern Eye Bolt, 1/2-13, 1-1/2 in L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 1/2-13 Thread, 1-1/2 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1-3/16 in ID Eye, 2-1/16 in OD Eye, UNC-2A Thread, 3.81 to 4.19 in Overall Length, 2400 lb Working Load, 1-1/2 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489
$5.33/Each
Total Stock Available : 0 |
KEN FORGING K2026 Fully Threaded Shoulder Pattern Eye Bolt, 9/16-12, 1-5/8 in L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 9/16-12 Thread, 1-5/8 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1-9/32 in ID Eye, 2-9/32 in OD Eye, UNC-2A Thread, 4.19 to 4.56 in Overall Length, 3000 lb Working Load, 1-5/8 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489
$9.85/Each
Total Stock Available : 0 |
KEN FORGING K2028 Fully Threaded Shoulder Pattern Eye Bolt, 3/4-10, 2 in L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 3/4-10 Thread, 2 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 2-1/2 in ID Eye, 2-13/16 in OD Eye, UNC-2A Thread, 5.06 to 5.5 in Overall Length, 5000 lb Working Load, 2 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489
$11.07/Each
Total Stock Available : 0 |
KEN FORGING M10 Fully Threaded Shoulder Pattern Eye Bolt, M10x1.5, 35 mm L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M10x1.5 Thread, 35 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 27 mm ID Eye, 46 mm OD Eye, Coarse Thread, 96 mm Overall Length, 1628 lb Working Load, 35 mm Thread Length, 65000 to 90000 psi Tensile Strength
$9.45/Each
Total Stock Available : 0 |
KEN FORGING M12 Fully Threaded Shoulder Pattern Eye Bolt, M12x1.75, 38 mm L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M12x1.75 Thread, 38 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 30 mm ID Eye, 54 mm OD Eye, Coarse Thread, 106.4 mm Overall Length, 2266 lb Working Load, 38 mm Thread Length, 65000 to 90000 psi Tensile Strength
$7.69/Each
Total Stock Available : 0 |
KEN FORGING M16 Fully Threaded Shoulder Pattern Eye Bolt, M16x2, 44 mm L Shank, Drop Forged Carbon Steel, Self-Colored
KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M16x2 Thread, 44 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 35 mm ID Eye, 65 mm OD Eye, Coarse Thread, 125.4 mm Overall Length, 3520 lb Working Load, 44.5 mm Thread Length, 65000 to 90000 psi Tensile Strength
$10.70/Each
Total Stock Available : 0 |
Refine