Jobber Length Drill Bits

Also known as standard length drills, they are the most popular and widely used lengths that can be used in portable and machine drilling. The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size.
View as Grid List
Sort by
Display per page
Picture of Drillco 500A125 Type J Heavy Duty Jobber Length Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco 500A125 Type J Heavy Duty Jobber Length Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 5-1/8 in Overall Length, 3-3/4 in Cutting Depth, 2 Flutes, Spiral Flute, 3-3/4 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Oxide Treated, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys
Call for pricing
Total Stock Available : 0
Picture of Drillco 500A126 Type J Heavy Duty Jobber Length Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco 500A126 Type J Heavy Duty Jobber Length Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 5-1/4 in Overall Length, 3-7/8 in Cutting Depth, 2 Flutes, Spiral Flute, 3-7/8 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Oxide Treated, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys
Call for pricing
Total Stock Available : 0
Picture of Drillco 500A129 Type J Heavy Duty Jobber Length Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco 500A129 Type J Heavy Duty Jobber Length Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 5-5/8 in Overall Length, 4-3/16 in Cutting Depth, 2 Flutes, Spiral Flute, 4-3/16 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Oxide Treated, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys
Call for pricing
Total Stock Available : 0
Picture of Drillco 500A130 Type J Heavy Duty Jobber Length Drill Bit, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco 500A130 Type J Heavy Duty Jobber Length Drill Bit, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 5-3/4 in Overall Length, 4-5/16 in Cutting Depth, 2 Flutes, Spiral Flute, 4-5/16 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Oxide Treated, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys
Call for pricing
Total Stock Available : 0
Picture of Drillco 500A131 Type J Heavy Duty Jobber Length Drill Bit, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco 500A131 Type J Heavy Duty Jobber Length Drill Bit, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 135 deg Point, Cobalt, Oxide Treated

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 5-7/8 in Overall Length, 4-3/8 in Cutting Depth, 2 Flutes, Spiral Flute, 4-3/8 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Oxide Treated, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys
Call for pricing
Total Stock Available : 14
Picture of Drillco 600A109 Jobber Length Drill Bit, 9/64 in Drill - Fraction, 0.1406 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A109 Jobber Length Drill Bit, 9/64 in Drill - Fraction, 0.1406 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 9/64 in Drill - Fraction, 0.1406 in Drill - Decimal Inch, 2-7/8 in Overall Length, 1-3/4 in Cutting Depth, 2 Flutes, Spiral Flute, 1-3/4 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 12
Picture of Drillco 600A110 Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A110 Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 3-1/8 in Overall Length, 2 in Cutting Depth, 2 Flutes, Spiral Flute, 2 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 24
Picture of Drillco 600A111 Jobber Length Drill Bit, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A111 Jobber Length Drill Bit, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 3-1/4 in Overall Length, 2-1/8 in Cutting Depth, 2 Flutes, Spiral Flute, 2-1/8 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A113 Jobber Length Drill Bit, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A113 Jobber Length Drill Bit, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 3-5/8 in Overall Length, 2-7/16 in Cutting Depth, 2 Flutes, Spiral Flute, 2-7/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 9
Picture of Drillco 600A114 Jobber Length Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A114 Jobber Length Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 3-3/4 in Overall Length, 2-1/2 in Cutting Depth, 2 Flutes, Spiral Flute, 2-1/2 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 12
Picture of Drillco 600A115 Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A115 Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 3-7/8 in Overall Length, 2-5/8 in Cutting Depth, 2 Flutes, Spiral Flute, 2-5/8 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 12
Picture of Drillco 600A117 Jobber Length Drill Bit, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A117 Jobber Length Drill Bit, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 4-1/8 in Overall Length, 2-7/8 in Cutting Depth, 2 Flutes, Spiral Flute, 2-7/8 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A120 Jobber Length Drill Bit, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A120 Jobber Length Drill Bit, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 4-1/2 in Overall Length, 3-3/16 in Cutting Depth, 2 Flutes, Spiral Flute, 3-3/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A121 Jobber Length Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A121 Jobber Length Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 4-5/8 in Overall Length, 3-5/16 in Cutting Depth, 2 Flutes, Spiral Flute, 3-5/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A122 Jobber Length Drill Bit, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A122 Jobber Length Drill Bit, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 4-3/4 in Overall Length, 3-7/16 in Cutting Depth, 2 Flutes, Spiral Flute, 3-7/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A123 Jobber Length Drill Bit, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A123 Jobber Length Drill Bit, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 4-7/8 in Overall Length, 3-1/2 in Cutting Depth, 2 Flutes, Spiral Flute, 3-1/2 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A125 Jobber Length Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A125 Jobber Length Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 5-1/8 in Overall Length, 3-3/4 in Cutting Depth, 2 Flutes, Spiral Flute, 3-3/4 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A127 Jobber Length Drill Bit, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A127 Jobber Length Drill Bit, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 5-3/8 in Overall Length, 3-15/16 in Cutting Depth, 2 Flutes, Spiral Flute, 3-15/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A128 Jobber Length Drill Bit, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A128 Jobber Length Drill Bit, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 5-1/2 in Overall Length, 4-1/16 in Cutting Depth, 2 Flutes, Spiral Flute, 4-1/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 600A129 Jobber Length Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A129 Jobber Length Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 5-5/8 in Overall Length, 4-3/16 in Cutting Depth, 2 Flutes, Spiral Flute, 4-3/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 12
Picture of Drillco 600A133 Jobber Length Drill Bit, 33/64 in Drill - Fraction, 0.5156 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco 600A133 Jobber Length Drill Bit, 33/64 in Drill - Fraction, 0.5156 in Drill - Decimal Inch, 118 deg Point, Uncoated

Drillco Jobber Length Drill Bit, Series: 600, Imperial, 33/64 in Drill - Fraction, 0.5156 in Drill - Decimal Inch, 6-5/8 in Overall Length, 4-13/16 in Cutting Depth, 2 Flutes, Spiral Flute, 4-13/16 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Carbide Cutting Edge, No Through Coolant, Uncoated, Applicable Materials: Aluminum, Bronze, Cast Iron, Cast Steel, Hard Copper and Hard Non-Ferrous Metals
Call for pricing
Total Stock Available : 0
Picture of Drillco 700A021 Jobber Length Drill Bit, #21 Drill - Wire, 0.0669 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco 700A021 Jobber Length Drill Bit, #21 Drill - Wire, 0.0669 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco Jobber Length Drill Bit, Series: 700, Imperial, #21 Drill - Wire, 0.0669 in Drill - Decimal Inch, 1-3/8 in Overall Length, 2-1/2 in Cutting Depth, Spiral Flute, 2-1/2 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Solid Carbide Cutting Edge, No Through Coolant, Solid Carbide, Uncoated, Applicable Materials: Cast Iron, High Silicon Aluminum, Hard Rubber, Non-Ferrous Alloys and Plexiglas
Call for pricing
Total Stock Available : 0
Picture of Drillco 700A104 Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco 700A104 Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco Jobber Length Drill Bit, Series: 700, Imperial, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 3/4 in Overall Length, 1-1/2 in Cutting Depth, Spiral Flute, 1-1/2 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Solid Carbide Cutting Edge, No Through Coolant, Solid Carbide, Uncoated, Applicable Materials: Cast Iron, High Silicon Aluminum, Hard Rubber, Non-Ferrous Alloys and Plexiglas
Call for pricing
Total Stock Available : 0
Picture of Drillco 700A112 Jobber Length Drill Bit, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco 700A112 Jobber Length Drill Bit, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco Jobber Length Drill Bit, Series: 700, Imperial, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 1-5/8 in Overall Length, 2-3/4 in Cutting Depth, Spiral Flute, 2-3/4 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Solid Carbide Cutting Edge, No Through Coolant, Solid Carbide, Uncoated, Applicable Materials: Cast Iron, High Silicon Aluminum, Hard Rubber, Non-Ferrous Alloys and Plexiglas
Call for pricing
Total Stock Available : 48
Picture of Drillco 700A119 Jobber Length Drill Bit, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco 700A119 Jobber Length Drill Bit, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated

Drillco Jobber Length Drill Bit, Series: 700, Imperial, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 2-3/8 in Overall Length, 3-3/4 in Cutting Depth, Spiral Flute, 3-3/4 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, Solid Carbide Cutting Edge, No Through Coolant, Solid Carbide, Uncoated, Applicable Materials: Cast Iron, High Silicon Aluminum, Hard Rubber, Non-Ferrous Alloys and Plexiglas
Call for pricing
Total Stock Available : 5
Refine
×
Category
Manufacturer
Availability
Product type
Drill Size - Wire
Series
Overall Length
Type
Shank Size
Cutting Edge Material
Cutting Depth
Drill Diameter Measurement System
Drill Size - Fraction
Drill Size - Metric
Flute Type
Through Coolant (Yes/No)
Cutting Direction
Shank Type
Point Angle
Drill Size - Decimal Inch
Number of Flutes
Weight
Flute Length
Drill Size - Letter
Point Type
Material
Finish
Applicable Materials
Popular tags