Non Rental
Dixon® DATL016 Air Tool Lubricant, 1 pt, Liquid, Yellow
Dixon® Air Tool Lubricant, 1 pt, 18.9 to 24.2 sq-mm/s, Liquid, Composition: Distillate (Petroleum), Hydrotreated Heavy Paraffinic, Yellow, 197.8 deg C Flash
Call for pricing
Total Stock Available : 108 |
Dixon® WB1 King Cable™ Hose Cable, 1/8 in, 20-1/4 in L, 200 psi, Carbon Steel, Domestic
Dixon® Hose Cable, Series: King Cable™, 1/8 in Nominal, 20-1/4 in Length, 200 psi Working, Carbon Steel, Galvanized, Domestic
Call for pricing
Total Stock Available : 793 |
Drillco 1000A136 1000 Imperial Silver and Deming Drill, 9/16 in Drill - Fraction, 0.5625 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000, 9/16 in Drill Size - Fraction, 0.5625 in Drill Size - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split Point, HSS Cutting Edge, HSS, Bright/Black, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 57 |
Drillco 174F13213 1740 Imperial Masonry Drill, 1/2 in Drill Bit, SDS-Max Shank, 7-1/2 in D Cutting, Carbide Cutting Edge, 13 in OAL
Drillco Masonry Drill, Imperial, Series: 1740, 1/2 in Drill Bit, Drilling, 13 in Overall Length, 7-1/2 in Cutting Depth, Spiral Flute, 7-1/2 in Flute Length, SDS-Max Shank, Carbide Cutting Edge, HSS, Uncoated, Applicable Materials: Granite, Marble, Concrete, Super Concrete, Polyester Glass, Hard Steel and Reinforced Products
Call for pricing
Total Stock Available : 0 |
Drillco 195E156 1950E Imperial Spade Paddle Bit, 7/8 in Dia, 6 in OAL
Drillco Spade Paddle Bit, Imperial, Series: 1950E, Drill Style: Spade, 7/8 in Diameter, 6 in Overall Length, Ball Groove Shank, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated
Call for pricing
Total Stock Available : 0 |
Drillco 200A108 Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Drillco Jobber Length Drill Bit, Series: 200, Imperial, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 2-3/4 in Overall Length, 1-5/8 in Cutting Depth, 2 Flutes, Spiral Flute, 1-5/8 in Flute Length, Straight Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Black Oxide, Applicable Materials: Cast Iron, Steel and Steel Forging
Call for pricing
Total Stock Available : 121 |
Refine