Walter Surface Technologies
Drillco 1000F145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F208 Imperial Silver and Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F224 Imperial Silver and Deming Drill, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000F232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000F, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N139 Imperial Silver and Deming Drill, 39/64 in Drill - Fraction, 0.6094 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 39/64 in Drill - Fraction, 0.6094 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
DRILLCO 1000N141 Imperial Silver and Deming Drill, 41/64 in Drill - Fraction, 0.6406 in Drill - Decimal Inch, 1/2 in Shank, HSS
DRILLCO Silver and Deming Drill, Imperial, Series: 1000N, 41/64 in Drill - Fraction, 0.6406 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Stainless Steel and other Hard Metals
Call for pricing
Total Stock Available : 0 |
Refine