Walter Surface Technologies
Drillco 1000C136 Imperial Silver and Deming Drill, 9/16 in Drill - Fraction, 0.5625 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
Drillco Silver and Deming Drill, Imperial, Series: 1000C, 9/16 in Drill - Fraction, 0.5625 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Cobalt Cutting Edge, Cobalt, Oxide Treated, Applicable Materials: Tough and High Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000C140 Imperial Silver and Deming Drill, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
Drillco Silver and Deming Drill, Imperial, Series: 1000C, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Cobalt Cutting Edge, Cobalt, Oxide Treated, Applicable Materials: Tough and High Tensile Strength Materials
Call for pricing
Total Stock Available : 40 |
Drillco 1000E216 Imperial Silver and Deming Drill, 1-1/4 in Drill - Fraction, 1.25 in Drill - Decimal Inch, 1/2 in Shank, HSS
Drillco Silver and Deming Drill, Imperial, Series: 1000E, 1-1/4 in Drill - Fraction, 1.25 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced with 3-Flat Shank, 118 deg Point, Conventional/Split Point, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low and Medium Tensile Strength Materials
Call for pricing
Total Stock Available : 0 |
Drillco 1000E8 Silver and Deming Drill Set, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 8 Pieces, HSS, Uncoated
Drillco Silver and Deming Drill Set, Series: 1000E, Imperial System of Measurement, 9/16 in Minimum Drill Bit Size, 1 in Maximum Drill Bit Size, 118 deg Drill Point Angle, 8 Piece, Specifications: 1/2 in Reduced Shank, HSS, Uncoated
Call for pricing
Total Stock Available : 0 |
Walter Surface Technologies ZIP WHEEL™ 11T070 High Performance Cut-Off Wheel, 7 in Dia x 1/16 in THK, 5/8 in Center Hole, A-30-ZIP Grit, Aluminum Oxide Abrasive
Walter Surface Technologies ZIP WHEEL™ Cut-Off Wheel, High Performance, 7 in Wheel Dia, 1/16 in Wheel Thickness, 5/8 in Center Hole, A-30-ZIP Grit, Aluminum Oxide Abrasive, 8600 rpm Maximum, Resinoid Bond, Applicable Materials: Cast Iron, Stainless Steel, Sheet Metal and Steel, Wheel Type Number: Type 1, For Use With: Circular Saws, Yes Reinforced
Call for pricing
Total Stock Available : 0 |
Drillco 170B1166 1700B Imperial Masonry Drill, 1/4 in Drill Bit, Chisel Cutting, SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6-1/2 in OAL
Drillco Masonry Drill, Imperial, Series: 1700B, 1/4 in Drill Bit, Chisel Cutting, Drilling, 6-1/2 in Overall Length, 4 in Cutting Depth, 4 in Flute Length, SDS-Plus Shank, Self-Centering Point, Carbide Cutting Edge, Uncoated, Applicable Materials: Granite, Marble, Concrete, Super Concrete, Polyester Glass, Hard Steel and Reinforced Products
Call for pricing
Total Stock Available : 8 |
Refine