Lifting & Rigging Hardware
A set of hardware which is used for lifting and rigging such as shackles, turnbuckles and rigging screws, lifting and lashing points, clamps, trolleys etc.
Crosby® 1068425 SL-150 SLIDE-LOC™ Lifting Point, 1.5 ton Load, 360 deg Swivel, 5/8-11 UNC Thread
Crosby® Lifting Point, Series: SL-150 SLIDE-LOC™, 1.5 ton, 360 deg Swivel, 5/8-11 UNC, 2-1/2 in W
Call for pricing
Crosby® 1068434 SL-150 SLIDE-LOC™ Lifting Point, 2.3 ton Load, 360 deg Swivel, 3/4-10 UNC Thread
Crosby® Lifting Point, Series: SL-150 SLIDE-LOC™, 2.3 ton, 360 deg Swivel, 3/4-10 UNC, 2.98 in W
Call for pricing
Crosby® SLIDE-LOC™ 1068452 SL-150 Lift Point, 3.2 ton Load, 90 deg Pivot, 360 deg Swivel, 0.76 in Dia Bail, 1-8 UNC Thread
Crosby® SLIDE-LOC™ Lift Point, Series: SL-150, 3.2 ton Load, 90 deg Pivot Angle, 360 deg Swivel, 0.76 in Diameter Bail, 1-8 UNC Thread, Threaded Mounting, 3.59 in W Dimensions
Call for pricing
McKissick® 119589 431 Super Champion Snatch Block With Shackle, 1-1/4 in, 30 ton Load, 20 in OD
McKissick® Snatch Block, Series: 431 Super Champion, 1-1/4 in Maximum Cable, 30 ton, 20 in Sheave Outside Dia, Bronze Bushing Bearing
Call for pricing
Jergens® 23412 Safety Engineered Center Pull Hoist Ring, 2500 lb Load, 1/2-13 in Thread
Jergens®, 23412, Hoist Ring, Safety Engineered Center Pull, 2500 lb Load, 1/2-13 in Thread, 28 ft-lb Installation Torque, Bolt-On Mounting, 4.78 in H x 3.52 in W Dimensions
Call for pricing
